Chemicals
Select A Chemical Leak Lock Red Epoxy Solderlene Thawzone Highside System Injector Gas Leak Detector Trax Trace2, Trace, & HydroTrace Spiro Lite UV Bulb Dye Wash Highside Acid Test Kit Acid Neutralizer Super Flush AC/R Internal System Cleaner Pink Stuff Green Stuff EV Coil Max HL Coil Brite Coil Cleaner Coil Blaster Solvent HD Jet Foamer Coil Cleaner Icemax Nickel Safe Ice Machine Cleaner Filter Fan & Vent Cleaner Mainsqueeze CDC Anti-Clog IceBlock Heat Transfer & Anti-Freeze SUPCO88 Oil Additive Zoom Spout Oiler Rust Buster Solvent Spot-It Leak Detector Kleen-Air Odor Absorber Acid Test Kit Apoxi Repair Kit Plasti-Fix Tabs Plastic Repair Epoxi Putty Starbrite Liquid Electrical Tape Page 1 • 2 • 3 • 4 • 5 • 6 • 7 • 8		For more information: www.highsidechem.com
	Table of Contents

---

Leak Lock MSDS Sheet Leak Lock Gold MSDS Sheet

Leak Lock and Leak Lock GOLD with Teflon A resin based soft setting brushable paste pipe joint compound resistant to all refrigerants, oils, water and most chemicals, liquids and gases. • Use with pressures to 10,000 PSI to full vacuums. • Temperature range -200°F (-93°C) to 400°F (204°C). • It never hardens and it never becomes brittle. • Ideal for joining all metals, plastics and other materials. • Will stick to all clean surfaces. • Prevent vibration from loosening nuts, bolts, plugs and fittings. • Non Toxic • GUARANTEES A PERFECT SEAL… UNDER ALL CONDITIONS

PART NO.	SIZE	PACKAGING
LEAK LOCK
HS10001	1-1/3 oz TUBE	12/CASE
HS10004	4 oz Brush Top Plastic Jar	12/CASE
HS10016	16 oz Brush Top Plastic Jar	12/CASE
HS10128	1 Gallon Can	1
LEAK LOCK GOLD
HS11001	1-1/3 oz TUBE	12/CASE
HS11004	4 oz Brush Top Plastic Jar	12/CASE
HS11016	16 oz Brush Top Plastic Jar	12/CASE
HS11128	1 Gallon Can	1

---

MSDS Sheet

Red Epoxy When you need a sealant you can count on. High Performance, Heat Cured, Two Part, Epoxy Kit

• Exhibits a Color Change When Cured (Turns Gold) • May Be Cured With a Hot Air Gun or Open Flame in Minutes • -100°F (-73°C) to 300°F (149°C) • Working Pressure in Excess of 3000 PSI • Tensile Strength: 6000 PSI • Works on Vertical Surfaces • Pressure Tested to 3000 psi • Simple, Quick Mixing & Application • Oil, Gas, Fuel & Solvent Resistant • No Rush, No Wait, You Control Curing Time • Equipment is Serviceable Immediately • Use on All Metals and Rigid Plastics • HVAC & Refrigeration • Plumbing & Appliances • Automotive & Marine • Petrochemical, Manufacturing • Industrial, Commercial, Institutional

PART NO.	SIZE	PACKAGING
HS12001	Kit Including 2 1/2 oz Tubes	12/CASE

---

MSDS Sheet	Solderlene High Quality, Paste Type, Non-Acid Soldering Flux.
	• Industrial strength wetting agents to promote solder flow • For use with low and mid-temp. soft solders, both lead and lead-free • Effective on all metals except aluminum and magnesium. • Brush Top Plastic Jars

PART NO.	SIZE	PACKAGING
HS30004	4 oz	12/CASE
HS30016	16 oz	12/CASE

---

MSDS Sheet	Thawzone (New Formula) The original liquid dehydrant, frees your frozen system in minutes. It seeks out moisture and chemically bonds to it.
	• Enhanced moisture control in even the most advanced systems. • Aids with oil return in low temperature systems. • Compatible with all refrigerants and refrigeration lubricants. • Helps prevent the formation of acid. • Safer • No Methanol • Biodegradable, non-polluting • Environmentaly Sound • Non-Poisonous
	Add 1/8 fluid ounce ( 3.75 ml ) of THAWZONE directly to the refrigerant of any system for every 1 lb. Of refrigerant in the system. *HIGHSIDE SYSTEM INJECTOR (part no. HSINJ001) IS RECOMMENDED FOR INTRODUCING THAWZONE INTO AN OPERATING SYSTEM.

PART NO.	BOTTLE SIZE	PACKAGING
HS17001	1 oz	24/CASE
HS17004	4 oz	12/CASE
HS17016	16 oz	6/CASE