Chemicals
Select A Chemical Leak Lock Red Epoxy Solderlene Thawzone Highside System Injector Gas Leak Detector Trax Trace2, Trace, & HydroTrace Spiro Lite UV Bulb Dye Wash Highside Acid Test Kit Acid Neutralizer Super Flush AC/R Internal System Cleaner Pink Stuff Green Stuff EV Coil Max HL Coil Brite Coil Cleaner Coil Blaster Solvent HD Jet Foamer Coil Cleaner Icemax Nickel Safe Ice Machine Cleaner Filter Fan & Vent Cleaner Mainsqueeze CDC Anti-Clog IceBlock Heat Transfer & Anti-Freeze SUPCO88 Oil Additive Zoom Spout Oiler Rust Buster Solvent Spot-It Leak Detector Kleen-Air Odor Absorber Acid Test Kit Apoxi Repair Kit Plasti-Fix Tabs Plastic Repair Epoxi Putty Starbrite Liquid Electrical Tape Page 1 • 2 • 3 • 4 • 5 • 6 • 7 • 8
	Table of Contents

---

	Acid Test Kit Tests for damaging acid in refrigerants
	• Kit contains 5 acid pads and solution for 20 tests • Economical and easy to use • Test requires only one drop of refrigerant oil • Test takes one minute • Gas does not have to be evacuated from compressor
	Acid in a system can cause: • Clogged cap tubes • Defective fan motors • Dirty condensers • Defective run capacitors • Low voltage • Cycling of overloads • Open start capacitors • Defective start relays

Part No.	Packaging
AT5	Each

---

	APOXI Repair Kit For repairing aluminum evaporators
	• Kit contains 2 tubes of APOXI, vial of methyl ethyl keytone, mixing sticks and emery cloth. • Cures in 12 hours • Tested at 1500 PSIG with R12, R22 and R502.
	Applications • Repairs leaks in aluminum evaporators • Repairs leaks in copper to aluminum joints and other metals • Eliminates electrolytic action between dissimilar metals
	Replaces: EP538

Part No.	Packaging
APOXI	Each

---

	PLASTI-FIX TABS Plastic Repair
	• Repairs cracked or broken door liners, cabinet liners and more

Part No.	Description	Size	Packaging
PF045	Almond	3.5 oz	Each

---

	Epoxi Putty
	• Cures Wet or Dry - will cure underwater • Mixes like clay hardens like steel • After curing, can be sanded, drilled, tapped, machined, sawn, or painted. • Initial set in 10 to 15 minutes, hard set 1 hour, with full cure in 24 hours. • Temperature range -65 F to +250 F • Works on glass, wood, plastic, fiberglass, tile, concrete, and many more.

SUPCO Part No.	Description	Quantity Per Carton	Replaces Gem No.
9900H	Tan Epoxy Putty 4 inch blocks	24	—
9900K	Tan Epoxy Putty 8 inch blocks	24	—
9901K	Tan Quick Epoxy Putty 4 inch blocks	24	—
9904H	White Epoxy Putty 4 inch blocks	24	EP8002 Half-size
9904K	White Epoxy Putty 8 inch blocks	24	EP8002
9906H	Aluminum Epoxy Putty 4 inch blocks	24	EP8001 Half-size
9906K	Aluminum Epoxy Putty 8 inch blocks	24	EP8001
9915K	White Fast Set Epoxy Paste	24	—

---

	STARBRITE Liquid Electrical Tape Seals and Protects Electrical Connections
	• Re-insulate cracked insulation without disconnecting wire • Saves time • Includes application brush

Part No.	Size	Packaging
84104	4 oz	1/CTN