|
|
|
||||||
• Integral Temperature, Humidity and Dew Point Measurements |
|||||||
| Specifications | |||||||
| Sample
Point Capacity |
21,500
for temperature only 10,750 points for Temperature, Humidity, Dew Point and Wet Bulb |
||||||
| Alarms | Over and under alarms for temperature & humidity. | ||||||
| Temperature
Range |
32°F
– 140°F (0°C – 60°C) w/ Alkaline Battery -40°F – 150°F (-40°C – 65°C) w/ Lithium Battery |
||||||
| Temperature
Accuracy |
+/-2°F (1°C) | ||||||
| Resolution
|
0.1°F (0.05°C) | ||||||
| Time
Accuracy |
+/-100ppm @75°F | ||||||
| Relative Humidity Range | 0% to 99.9%RH, non-condensing | ||||||
| Relative Humidity Accuracy | +/- 2% full scale, from 0% to 95% RH for temperatures between 32°F and 140°F (0°C – 60°C) | ||||||
| Relative Humidity Resolution | 0.1%RH | ||||||
| Operating
Range |
|||||||
|
Temperature |
32°F
– 140°F (0°C – 60°C) using Alkaline Battery. -40°F – 150°F (-40°C – 65°C) using Lithium Battery |
||||||
| Humidity |
0% to 99.9%, Non-condensing | ||||||
| Storage
Temperature |
-40°F – 170°F (-40°C – 77°C) | ||||||
| Calibration
|
Single point offset calibration available through software. Humidity is factory calibrated. | ||||||
| Dimensions
|
3’’ x 2.5" x 1.1’’ (7.6cm x 6.4cm x 2.8cm) | ||||||
| Weight
|
2.5 Oz (71g) | ||||||
| Power
Source |
9V Alkaline or Lithium battery | ||||||
| BatteryLife (average use) |
20 Months using Alkaline Battery 40 Months using Lithium Battery |
||||||
| Accessories for LT2, LTT, and LTH | |||
|
LT2
|
LTT
|
LTH
|
|
| Standard | |||
| 15’ Remote Temperature Sensor (14265) |
X
|
-
|
-
|
| 4” Stainless Steel Temperature Sensor (DLTP6) |
-
|
X
(2)
|
-
|
| Optional | |||
| Lithium Battery (LITH9B) |
X
|
X
|
X
|
| USB to Serial Interface (USBS |
X
|
X
|
X
|
| 25’ Temperature Probe Extension Wire (SW25) |
X
|
-
|
-
|
| 50’ Temperature Probe Extension Wire (SW50) |
X
|
-
|
-
|
| 75’ Temperature Probe Extension Wire (SW75) |
X
|
-
|
-
|
| 100’ Temperature Probe Extension Wire (SW100) |
X
|
-
|
-
|
  |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
