icon on the toolbar to download and view the data that has been logged.Follow the procedure below to quickly start using your new LOGiT data logger.
1. Connect an alkaline or lithium 9 volt battery to your logger. If the battery is connected correctly, the logger status LED will flash green five times.
2. If you have a serial (COM) port adapter, connect it to a free serial port on your computer. If you have a USB adapter, connect it to a free USB port on your computer. Refer to the "Connecting the Logger to Your PC " section for more information.
3. Open the logger sliding door and connect the supplied RJ12 cable to the logger. Connect the other side of the cable to the serial or USB interface adapter.
4. Start the LOGiTpc interface program.
5. From the Logger menu, select Setup ….
6. Select "Logging starts when setup is complete" option and click the Continue button.
7. Click OK when the warning message appears.
8. Click OK again.
The logger is now logging data. You can click on the icon on the toolbar to download and view the data that has been logged.