The Data Information window is separated into three panes: Data, Alarm Summary and Data Summary.
The Data pane lists every temperature sample in logger memory. If the data rollover check box in the setup window was cleared, the earliest temperature samples (up to 2048 samples) are listed. If the data rollover check box was checked, the latest temperature samples (up to 2048 samples) are listed.
Temperature samples that are above the high alarm threshold are shown in red. Temperature samples that are below the low alarm threshold are shown in blue.
The amount of data samples shown (and printed) can be reduced by using the data filter. The data filter can also be used to show only those samples that exceeded the alarm thresholds.
The alarm summary pane lists the time of occurrence and the duration of both high and low temperature alarms. Up to 12 separate high and low alarm events are recorded. Alarm memory does not rollover, so only the 12 earliest alarms are shown.
Alarm information is collected whether or not the SL200 data sample memory is full, until you select End Logging from the Logger menu.
The data summary pane summarizes the information from the other two panes. This pane shows three summaries:
1. Data Summary: A summary of the data pane.
2. Logging Summary: A summary of the logging session used to collect the data.
3. Alarm Summary: A quick indicator of whether or not high or low temperature alarms occurred.