Your logger comes complete with the software and the USB interface cable. To connect the logger to your computer, follow these steps:
Connect the USB cable to the logger and to a free USB port on your computer.
If you are connecting the logger to the PC for the first time, the logger will automatically be recognized and installed on your computer.
Start the SUPCOLog program and click on the 
icon
on the toolbar.
The logger status screen should now be displayed.
Note: The Windows operating system can not handle USB devices being unplugged and replugged too fast. When unplugging the logger, wait for about 5 seconds before plugging it (or any other USB device) in again. If you unplug and replug a device too quickly, the computer may stop recognizing any USB devices on that port. If this happens, the only solution is to restart the computer. This is a Windows USB problem and is not related to the SUPCOLog software.
If more then one logger is connected to your computer at the same time, the program will ask you to select one of the loggers:
To select a logger click on one of the loggers on the list, and click the Connect button.