Product Category

Hover over picture to Zoom
Click to enlarge

RIM313

RIM313--ICEMAKER FOR:1129313, ECKMF-64

Offering the modular icemaker, ice bin, water valve, fill line, tubes and harness, this kit was designed as an add-on to certain pre-wired models.

Features/Benefits

  • Includes icemaker, ice bin, water valve, fill line, tubes, and harness.
  • See Cross Reference tab for additional numbers
  • Used on many Whirlpool® brands
Locate a Distributor Near You
Voltage: 120V
Dimensions: 11.25" x 5.0" x 4.5"
Replacement Icemaker
SDS Product Sheets Cross Reference Information
no entry RIM313_prd_001.pdf
no entry

Manuals Application Sheets Software
RIM313_man_001.pdf
no entry no entry

Replacement Part:940556
Part Description:
Manufacturer :Whirlpool®

Replacement Part:1118554
Part Description:
Manufacturer :Whirlpool®

Replacement Part:1105298
Part Description:
Manufacturer :Whirlpool®

Replacement Part:1118746
Part Description:
Manufacturer :Whirlpool®

Replacement Part:1114185
Part Description:
Manufacturer :Whirlpool®

Replacement Part:1129313
Part Description:
Manufacturer :Whirlpool®

No Accessories Available

What is the harness wire pin out?: On most 4 wire harnesses, it is white/neutral, black/power, green/ground, and brown/water valve.
Why is the shut off arm binding?: Check the fill cup hole. It might be skewed. Make sure the arm can move freely in the fill cup hole.
How do I select the correct icemaker for my refrigerator? : It is based on the model number of the refrigerator.
What is the extra white plastic piece in the kit?: It is a bracket that is used in some applications, if your refrigerator doesn't already have it, you don't need it.
Everything is installed correctly, still not making ice?: Freezer needs to be 0° or lower before the icemaker will call water valve for water.
Where is the ice level adjustment screw?: Under the white cover, on the side of the module. DO NOT OVER TURN!
The icemaker only cycled once, and doesn't go back on unless the arm is manually pushed down?: The arm is likely not installed properly. Align it flush to the side of the icemaker, then install per instructions.
What is the part number for the harness?: There are no harnesses sold separately. You will need to replace the entire kit.