Hover over picture to Zoom
Click to enlarge
RIM469
RIM469--ICEMAKER FOR: WPW10715708
This kit includes a new ice bin, a single coil icemaker valve, and fill tubes. RIM469 is an excellent choice to replace standard modular icemakers using the existing harness.
Features/Benefits
- Designed to replace the Whirlpool® 2155469A and ECKMF-94 add-on kit
- If used with the old harness, this unit can also be used on Amana®, & Maytag®
- Includes icemaker, ice bin, water valve, fill line, tubes, and harness.
- See Cross Reference tab for additional numbers
| Voltage: | 120V |
| Dimensions: | 11.25" x 5.0" x 4.5" |
| Replacement Icemaker |
| SDS | Product Sheets | Cross Reference Information |
| no entry | RIM469_prd_001.pdf |
no entry |
| Manuals | Application Sheets | Software |
| RIM469_man_001.pdf |
no entry | no entry |
Replacement Part:IMKIT94
Part Description:
Manufacturer :Whirlpool®
Replacement Part:2171811
Part Description:
Manufacturer :Whirlpool®
Replacement Part:2155468
Part Description:
Manufacturer :Whirlpool®
Replacement Part:ECKMF-94
Part Description:
Manufacturer :Whirlpool®
Replacement Part:2155469A
Part Description:
Manufacturer :Whirlpool®
Replacement Part:2155469
Part Description:
Manufacturer :Whirlpool®
Replacement Part:WPW10715708
Part Description:
Manufacturer :Whirlpool®
Replacement Part:W10670871
Part Description:
Manufacturer :Whirlpool®
No Accessories Available
| What is the harness wire pin out?: | On most 4 wire harnesses, it is white/neutral, black/power, green/ground, and brown/water valve. |
| Why is the shut off arm binding?: | Check the fill cup hole. It might be skewed. Make sure the arm can move freely in the fill cup hole. |
| How do I select the correct icemaker for my refrigerator? : | It is based on the model number of the refrigerator. |
| What is the extra white plastic piece in the kit?: | It is a bracket that is used in some applications, if your refrigerator doesn't already have it, you don't need it. |
| Everything is installed correctly, still not making ice?: | Freezer needs to be 0° or lower before the icemaker will call water valve for water. |
| Where is the ice level adjustment screw?: | Under the white cover, on the side of the module. DO NOT OVER TURN! |
| The icemaker only cycled once, and doesn't go back on unless the arm is manually pushed down?: | The arm is likely not installed properly. Align it flush to the side of the icemaker, then install per instructions. |
| What is the part number for the harness?: | There are no harnesses sold separately. You will need to replace the entire kit. |
