SLS141250
SLS141250--DURO-LINE™ Steel Line Set 1/4" x 1/2" x 50'
Duro-Line™ is a Steel tubing with an innovative coated low carbon steel alternative to Copper Line Sets. With higher strength & durability, it is a sustainable alternative to copper, aluminum or plastic.
Features/Benefits
- Provides 40% higher operating pressure than copper and will support continuous demand operating pressures at 5,500 psi
- Supports operation temps at -55°F to 500°F and approved testing with new A2L refrigerants.
- Burst pressure tested above 7,000 psi
- UV Insulated Lineset Coils up to 164 ft. and up to 30K feet of uninsulated coils
- Durability tested to exceed new A2L refrigerants
- Carries all known HVAC & Refrigeration Refrigerants
- Made in USA
| Liquid Line Size: | 1/4" |
| Suction Line Size: | 1/2" |
| Length: | 50 Feet |
| Pressure Rating: | 1100PSI |
| Agency Approvals: | UL® |
| Warranty: | Limited 20 Year |
| Mini Splits and VRF Systems |
| Commercial Installations |
| High Corrosive Areas (Coastal Communities) |
| Unitary Line Sets |
No downloads
No Cross Reference Available
No Accessories Available
| Can you replace old line set with Duro-Line steel tubing?: | Yes, especially if the old line set is losing too much energy. |
| Does Duro-Line use standard fittings?: | Yes, all standard fittings. |
| Can Duro-Line be cut with aftermarket tubing cutters?: | Yes. |
| Can you use a tubing bender on Duro-Line?: | Yes, Duro-Line does not require any special cutting, bending, or chamfering tools. |
| Does Duro-Line kink easily?: | No, Duro-Line is stiffer than standard copper, kinking is not a concern if tube bender is used properly. |
| Can you attach temperature probes to Duro-Line?: | Yes, non-marring clamps should be used to protect the tube coating. |
| Is Duro-Line compatible refrigeration flushing fluids?: | Yes. |
| Is Duro-Line insulation UV rated?: | Yes, Armaflex Shield is ASTM G154 tested to 5000 hours. |
